Best Plasma Cutter Reviews for The Money 2017

Science has discovered plasma in 1879. But who had known that this will be a tie-breaker between the stiffness of metals and effort of humans?

With the help of a plasma cutter, it’s possible to cut any metal like a knife cuts butter.

If you are a mechanical worker or interested in artistic metal works or has a small workshop, you can’t ignore the necessity of a plasma cutter.Having one of this will speed up your work to a great extent as well as give you release from the hassle of manual cutting.

But as you are now on this page, you may be determined to have one of them, but confused which one. Right?This is natural. Because you will find a plethora of them out there.

But the mammoth question is, which one worth the money?

That is why we are here to introduce you with the top ten plasma cutter by this time.All of them have proven record of professional performance. So, I hope by the end of this plasma cutter review, you will get a clear picture of them.

Things to Consider Before Buying the Best Plasma Cutter

We have researched for weeks to make our list of the best plasma cutting tool. All of the cutters of our list are best from a different point of view. So, not every cutter will be suitable for everybody. But if you answer the following questions, picking up the best one for you, will be much easier. So let’s discuss the criteria.

How Much Cutting Depth do You Need?

This is the most important fact that you should consider first. So, are you a professional mechanical worker or mechanical works is just your hobby?

Let's assume you are a professional worker. Then you are going to need a machine with more deep cutting capability. Because you will often require cutting deep holes or lines into plates.

Moreover, if you want to use the cutter in an industry, a cutter with less deep cutting capability may give rise of problems. So, at such condition, you should prefer a cutter that has minimum severance cutting capability of one and a half inch.

On the other hand, if you are just an artistic worker and works at home, without some uncommon cases, it won't require having a cutter having more than 3/8 inch severance cutting range.

What is the Rating of Your Voltage Rating?

If you work at home, then you should choose a cutter according to the supply voltage that you have there.

But if you are in service, you may have a problem with a fixed voltage rating machine. So at such cases, you must have one that runs with both 110 V - and 220 voltage rating. Again, this type of dual voltage cutter works on both 50 and 60 Hz frequency. So, having this type of cutter will give you more flexibility.

For industrial work, you can choose according to the supply voltage of your industry.

Although most of the plasma cutter has variable voltage operation for those which don't have this capability using a converter will solve this problem.Some of them have built in converter that automatically adjusts the voltage. So choosing these will be wiser.

Will it be for Personal or Professional Purposes?

The rating of the machine varies in case of personal and professional use.

When you want to use the machine for your personal purposes such as artistic works or repair work, you can take as much time as you need. So you needn't worry about the cutting speed.

But when you are a professional worker, you must be more time efficient.

So in this case, choose that one which has more plasma flow rate. You can easily identify them from their air pressure. Generally having the air pressure of 75 Psi or more is considered to be suitable for speedy work.

Do you need a Multipurpose Plasma cutter?

Repair work sometimes doesn't only requires cutting, but also need to be weld. So having a welding machine built with plasma cutter speeds up the work to a great extent.

Fortunately, some of the plasma cutters have this functionality integrated with them. So, if don't want to spend money behind a welder separately, you can choose one of them.

What are the Materials Type that you will Work with?

Although all type of plasma cutter works fine with all type of metals, some of them have greater efficiency with a specific type of metals.

As for example, some cuts the alloy materials well, usually these type of plasma cutter has strong cutting power. On the other hand some works with no ferrous metals, like aluminum, cobalt, nickel, and copper.

So you need to choose according to the materials you have to deal with.

Top 10 Best Plasma Cutter Reviews

1.Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter

Lotos is renowned for manufacturing quality welding machined for years. And the Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter is not the different.

If you ask any professional, what is the best plasma cutting tool for money? Most probably the answer you will get is Lotos LTP5000D.

Firstly, this one uses a pilot arc torch that efficiently cuts through rough or painted surface. The major advantage of this type torch is, it doesn’t create any slag, whatever the condition of the surface is. Moreover, this doesn’t require touching the surface and has a great durability.

Lotos LTP5000D gives you awesome flexibility. This one normally works on 110 v source having 50 or 60 Hz frequency. But you can also use this on 220 V source using a pigtail.

But above all of these, the most important criteria to judge a plasma cutter is its cutting ability. And at this point, Lotos LTP5000D is also a perfectionist.

This one has a normal clean cutting range of half an inch and the severance cutting range of three-quarter inch. This range is perfect for normal house workshop or firm repairing and light construction work.

Moreover, with this cutter doing light industrial works is also possible. Again for cutting, comparatively thin plates, this one also gives fine performance because of the steady flow plasma.

This is lightweight and also has enough engagement to carry to anywhere without any hassle.

On the other hand, this one uses PAPST – an advance German cooling system. As a result, this one can give consistent performance.

So putting these all together, this one is really the one that worth the money.

Highlighted Features:

  • check
    Half inch clean cut and three quarter severance cut.
  • check
    Works on both 110 v and 220 v as well as 50 and 60 Hz.
  • check
    Pilot arc torch.
  • check
    Weighs only 25 pounds.
  • check
    Both AC and DC operation.
  • check
    PAPST cooling system.
  • check
    50-ampere digital inverter.
  • check
    MOSFET transistor.
  • check
    Automated voltage stabilization.

2.LOVSHARE Plasma Cutter 50A 5.5KVA Plasma Welder

If ROI is your major concern, the LOVSHARE Plasma Cutter that you are going to love. This one has relatively more cutting speed compared to other plasma cutter.

This one shows good performance against all type of metals and alloys. But this one has more efficiency while working with no ferrous metals and alloys like nickel, aluminum, copper.

LOVSHARE Plasma Cutter 50A is a light weight and compact plasma cutter and if you compare the price, this is one of the economical too. For home workshop as well as professional service, this one is suitable for its properties.

This one also has simple operation and that is why it's favorite for the newbies. Again the heat affective zone is comparatively smaller. So there is no chance of hazard or injury. Small thermal deformation ensured the smoothness of works and let it done within a minimum amount of time possible.

For cooling system, this one uses a relatively larger fan. And remember this is really an important thing for a plasma cutter. Because plasma cutter consumes higher energy and for this cutter, it's 5.5kw. As a result, the components produced an extreme amount of heat. So enough engagement is required for long time operation and this one occupies that.

Finally, it comes to cutting depth. This one has severance cutting depth of 13 mm. And the cutting speed is impressive because of the use of high-pressure gas.

Highlighted features​:

  • check
    13 mm highest cutting depth.
  • check
    5.5 kW power consumption.
  • check
    110 v no load voltage.
  • check
    Semi-automatic operation.
  • check
    .93 power factor.
  • check
    3-meter torch cable lead assay.
  • check
    Total 5 electrodes.
  • check
    Weighs 21 pounds.

3.PrimeWeld Ct520d 50 Amps Plasma Cutter, 200 Amps Tig Welder and 200 Amps Stick Welder Combo

PrimeWeld Ct520d – the most power efficient plasma cutting machine of our top list having the efficiency of up to 85 percent.

But it's not the only efficiency that is why we placed it in the third position of our top list. This one is a combo of bot plasma cutter and welder. And as we all know it often requires to cut and weld metals. So, this welding option makes works quicker and easier.

This one has comparatively higher weight than others. The manufacturer couldn't help but had to make it, heavy because of the welding option. And if you are popular with welding machines, you must know how heavy they are. So at this respect, this having a weight of 32 pounds is not a miracle.

The cutting depth isn’t that much high, only half inch severance. But his is enough for home purpose use. The torch length is sufficient, but the problem is that the torch isn’t pilot arc type. Therefore, this the cutting surface doesn’t become that smooth.

This one runs on 220 volts and the duty cycle is about 80%.  Which means that for ten minutes, you can work on the highest power of this machine.

So, putting these all together, this can be said that PrimeWeld Ct520d will be pretty much suitable for light welding works. Again this will be a perfect choice for those don’t want to buy a welding machine separately although it requires to weld often after plasma cutting.

Highlighted features:

  • check
    Up to 85% efficiency.
  • check
    80 percent duty cycle.
  • check
    Three in one plasma cutter with welding.
  • check
    Weighs 32 pounds.
  • check
    Up to half inch severance cutting.
  • check
    Operates on both 50 and 60 HZ.
  • check
    DC tig welder.

4.PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter

This one is for the professionals by the professionals. So there is no doubt about the quality and performance of this plasma cutter. Like the cockroach, it can cut everything you have to deal with.

The very first thing that I appreciate about this plasma cutter is; it's portability and flexibility in work. This one comes in a convenient pack. Therefore carrying this one is pretty easy. This will add extra benefit if you are a professional mechanical worker. Again, whether you have a 110 V supply or 220 V, this one works with both.

Well enough. No doubt. But how about the cutting performance?

I have mentioned before that this one is a cockroach. Steel, steel alloy, copper or whatever it is, but except titanium, this one can cut it smoothly. Normally this one works well with half inch plate but the highest limit is three-quarter.

Also for thin plates. This one works well because of its constant and steady flow of plasma. So don't worry for your artistic works on them.

An almost ten feet long assay covers more area and hence lets you work on big projects. The air pressure is huge, 65 psi – that lets your job done quickly with less effort.

This one has a long air filter cable. As a result, you can keep it far and therefore the air supply that the machine gets is clean.

After all of this what you get from this machine is maintenance free longtime service that everyone expects most from every machine. And also you have a long time warranty with this machine and most of all a good customer service from Primeweld.

Although all the things about this plasma cutter are appreciable, one thing that I don't like about this plasma cutter is its torch. I think it's cheaply made and doesn't have a good and safety grip.

Finally, putting these all together, it can be said doubtlessly that this one worth the saying “For the Professionals by the professionals”.

Highlighted features:

  • check
    Works on dual voltage rating 110 V and 220 V.
  • check
    ½ inch normal cutting depth and ¾ inch maximum.
  • check
    MOSFET transistor for high power output.
  • check
    9’9” assay and 6’6” long air filter.
  • check
    Four clamps and 2 couplers.
  • check
    65 Psi pressure input.
  • check
    Weighs 22.5 pounds.

5.Lotos LTP8000 80Amp Non-Touch Pilot Arc Air Plasma Cutter

When it requires a deep cutting and more control over the cutter, what can be better that Lotos LTP8000?

Lotos is renowned for years for manufacturing various types of professional quality welding machinery. The Lotos LTP8000 is not a different.

This machine is one of the most efficient ones of our best plasma cutter list. With a 60% efficiency, this one is promised to give you the most output in cutting performance.

Lotos LTP8000 has an impressive feature, that it doesn’t create any slag while working with rusted metals. Whatever the condition of the surface is, this one cuts well.

This one uses an advanced cooling system. Therefore, this plasma cutter is pretty good for long time operation.

After all of these, what we primarily need from a plasma cutter is the cutting performance and also at this point, Lotos LTP8000 is a good performer. This one has a clear cutting range of one inch as well as the highest cutting depth of one and a half inches.

Therefore, for general cutting purposes, this one can be considered enough powerful cutter. But don't worry if you have to cut thin metal plates. Because this one also has the proper engagement for that.

As you can easily control the plasma flow, cutting any plate of metal having a range within one and a half inch is possible with this plasma cutter. 

Finally, this one is a fully maintenance free machine that is promised for reliable, consistent and clear cutting performance.

Highlighted features:

  • check
    1" clean-cut & 1.5" severance cut.
  • check
    80-ampere rating with 50/60 Hz frequency.
  • check
    6% efficiency.
  • check
    Only works on 220 V.
  • check
    MOSFET transistor for uniform output.
  • check
    Pilot arc torch.
  • check
    Weighs 45 Pounds.

6.Hypertherm 088079 Powermax30 XP

If cutting depth isn’t your primary concern and all you want is more precise cutting with confidence, the Hypertherm 088079 Powermax30 XP is here for you.

Although the cutting depth of this cutter is lower, 20 inch per minutes for 10 mm depth and 5 inches per minute for 16 mm depth, this one is able to more precisely.

But not only has the cutting performance had that pulled this one into our top list. This one provides much more benefits that every user going to love.

It’s featured with a 15 feet lead torched which is further rugged to relief stress. Again this extra length adds extra flexibility in works. Again this one has a smart interface and with just one knob you can easily control the plasma flow.

One of the most impressive thing about this plasma cutter is its capability of working with a wide voltage range. This one has stabilizer system and hence can work within the voltage ranges from 110 V to 240 V.

Safety matters when you work with a plasma cutter. As this one never uses any explosive gas, there is no chance of an accident.

After all of these awesome functionality what adds an extra dimension to its awesomeness is its portability. As this one weighs only 9.5 kilograms, can be transported to anywhere with less effort.

Putting all these things in one sentence, this it can be said that, this one will be an awesome one for those who need a cutter that cuts more precisely and has a good portability.

Highlighted Features

  • check
    113.3 liter gas flow per minute with 80 Psi pressure.
  • check
    3-meter power cable.
  • check
    15 feet lead torch cable.
  • check
    35% duty cycle at 240 V and 20% at 120 V.
  • check
    20 inch per minute at 10 mm depth and 5 inches per minute at 16 mm depth cutting speed.
  • check
    Weighs 9.5 kilograms.

7.Amico Power DC-160A

Amico Power DC-160A is for those, who are looking for a light plasma cutter for their hobby or artwork. And yes, you don't need to break the bank to get off this.

First of all of we look at the cutting performance of this cutter, the highest depth that it can cut is only 3/16 inch. Ok, this may seems to be pretty low, but you should remember that this one is only has a rated output of 20 Amp.

So at this sense, the cutting performance can be compromised. Again, no plasma cutter out there is going to offer you such depth of cutting just under 200 bucks.

So, now the question arises, if the cutting performance is not that much high, what pulled this one in our top list?

Ok, first of all, this one is a light weight plasma cutter having only 18 pounds of weight. Hence this one can be transported easily.

Again this one uses very much low energy, the input voltage varies from 115 to 230V and the current required to operate this machine is 20 ampere. As a result, this one saves a huge amount of energy.

As I have mentioned above, this one is built for light cutting works where there is no need of high energy. Therefore using this one instead of a highly powerful cutter, will save your electric bills.

This DC welder comes with an electric holder with 10 feet cable. But the cable could be larger for more flexibility.

Finally, this can be said that this one will be a perfect plasma cutter for light farm and home maintenance and repair work as well as light artistic work.

Highlighted Features

  • check
    3/16 inch highest cutting depth.
  • check
    20-ampere power rating.
  • check
    10 feet electrode holder with 10 feet assay.
  • check
    ETL listed.
  • check
    Up to 60% efficiency.
  • check
    Weighs only 18 lbs.

8.OrangeA Plasma Cutter cutting 50A Digital Inverter

If we classify plasma cutters according to their ability of cutting, the OrangeA Plasma Cutter cutting 50A Digital Inverter will be in the midrange. This one is specially designed for home workshop and light industrial use. 

This one gives flexibility in works as it works on dual voltage and frequency. The voltage rating is 110 or 220 v and the frequency is 50 or 60 Hz. So, you can use this one worldwide.

As I have mentioned above, this one has midrange cutting performance. The normal cutting depth is a quarter inch and the severance cutting depth is 3/8 inch. So from this point, this will be a perfect one for the home workshop and light industries.

This machine uses 75 psi pressure for its operation. But the maximum cutting depth is 3/8 inch. This is somewhat not rational. But these excess pressure gives you extra speed while cutting any type of steel, or alloy.

Finally, this one includes all the accessories that you must need to operate this properly. A ground clamp that is 8 feet long, perfect for this plasma cutter. The torch is of type TP31 is well made and durable for long term use.

But the torch assay, although made from lead isn't long enough for ease of work. Hence the main body should be transported often for a big body.

Measuring all the ratings, this fact is clear that this cutter will be very much suitable where great cutting speed is needed, rather than cutting depth.

Highlighted Features

  • check
    Normal cutting thickness quarter inch and severance thickness 3/8 inches.
  • check
    Current adjustment 10 to 50 ampere.
  • check
    Include 5 electrodes.
  • check
    8 feet ground clamp cable.
  • check
    9.5 feet cutting torch cable.
  • check
    110 or 220 v power supply and works on both 50 and 60 Hz frequency.

9.Goplus CUT-50 Electric Digital Plasma Cutter

For smooth cutting and great workability, what can be better than Goplus CUT-50 Electric Digital Plasma Cutter?

Let’s discuss one by one.

First of all, wherever you are and whatever the condition is, this one offers you a great workability. This one runs on both the 110 and 220 voltage rating. On the other hand, the frequency rating is both the 50 Hz and 60 Hz. So, no need to worry wherever you live.

Again this one has the ability to work in any weather condition. This one is made in such way that it can works on even 80 percent dampness without creating any slag on the metal plate.

This one is a compact and lightweight plasma cutter machine having great portability and hence can be transported to anywhere. 

Again as this one transform the AC into DC, usage of inverter technical switch has increased the efficiency of the transformer to 30 %. That means it will save some electricity.

This machine can supply gas ahead and turn off the gas delay, therefore, you will get a continuous and steady flow of plasma. Finally, as a result, the cutting edges will be smooth and wouldn’t require further polishing.

After all of these awesome functionality, this machine is one step away to be awesome. Yes, you guess the right thing. Cutting performance.

This machine has the highest cutting depth of 12 mm. also this one cuts the thin film of metals well because of its steady flow of plasma without creating any undulation. Whatever the metal type is, steel, alloy, aluminum, copper alloy, the performance is same.

Finally, with respect to great workability and control over the machine,Goplus CUT-50 Electric Digital Plasma Cutter beats all.

Highlighted Features

  • check
    Maximum cutting depth12mm.
  • check
    30 percent transformer efficiency.
  • check
    Works on both 110 and 220 V and 50 and 60 Hz respectively.
  • check
    HF oscillating pilot arc.
  • check
    1 mm diameter burner.
  • check
    Up To 80% dampness operation.
  • check
    High cutting speed with low noise.
  • check
    -10 to +40 degree temperature operation.

10.Mophorn 110v Plasma Cutters Portable 50A Tig Welder

If the duty cycle is considered, Mophorn 110v Plasma Cutters Portable has the most capability compared to all other plasma cutter.

It has a duty cycle of 60% when operated in 50 amperes and 100% percent when operated in 30 amperes.

Although you needn’t have more duty cycle than 50 percent, a greater will increase the efficiency of your work. And that is why this machine beats other at this point.

For more accurate cutting, this one has awesome performance. The normal cutting depth of this machine is 6 mm and the severance depth is 10 mm. The plasma flow is steady, therefore there will be no hazard while cutting thinner plates.

The cooling system of this plasma cutter is 20 % bigger than others. Therefore this can keep the machine cool for the longer time. And hence you can work for longer time.

It uses 75 psi air pressure, which means it takes comparatively small amount duration for cutting. So for quick work, this is the most suitable.

Finally, this one has digital display and smart interface. As a result, this one lets you work with more efficiency and control over the machine. The cutting torch is three meters long hence it gives more flexibility.

In conclusion, this one will be the most suitable where their smoothness in cutting is needed.

Highlighted Features

  • check
    6 mm normal and 10 mm severance cutting.
  • check
    75 psi air pressure.
  • check
    60% duty cycle at 50 amperes and 100% at 30 amperes.
  • check
    5.5 KVA power rating.
  • check
    2.5-meter torch cable lead assay.
  • check
    50 or 60 Hz output.
  • check
    Latest cutter technology.
  • check
    Large cooling fan.

How Does a Plasma cutter Work

Plasma cutting technology was first invented in 1950 and the commercial application was first introduced in late of 1960. After that, it has gone through many evolutions. But the basic mechanism is the same.

 A plasma torch has three main component. The torch electrode, cutting gas and the gas shield.

The gas can be oxygen, nitrogen or even clean air. The gas doesn’t have any major effect one the cutting performance.

The mechanics of a plasma cutter is simple. This one works like a cork borer. An arc of plasma acts like a borer and spins through the metal plate to cut it.

As mentioned before plasma cutter uses gas for operation. The gas transforms into plasma due to the high temperature.

The target metal plate that we want to cut act as an anode. And the plasma torch has a cathode inside it. So both of them are the parts of the circuit.

As plasma is nothing but the same amount of positive and negative ions, they are highly conductive of electricity.

When the restricted opening lets the pressurized gas to be out from the opening the plasma transfer the work to the metal plate as the electric circuit that is consist of the torch and the target metal plate full filled.

And as the plasma has very high temperature, the metal melts and the plasma borer easily penetrates the malted plates. There is also a flow of shield gas that protects the area you are cutting by the torch.

Some of the modern plasma cutter uses pilot arc torch. This torch uses ionized gases. This ionized gas provides a better shield to the cutting area.

For initializing the torch, at first, it needs to be tip to create the spark. Because of doing that, a high-frequency electric circuit starts. This works like a spark plug.

But some of the best plasma cutters for CNC machines doesn't require this initialization. They did this automatically.

Plasma Cutter Safety Guide

Plasma cutters can be small in size but they have massive power. If you are reading this article from the beginning, you already know that some of the cutter uses 5.5 kW energy per hour. So, this thing is not a toy. You must follow some safety guide for your own wellbeing.

General Safety:

Don't allow anybody does stay close to the cutter, especially children's and those don't have knowledge of this machine.

When you began to work with a plasma cutter, let everybody around you know that you are starting. And look for if there is any explosive gas out there.

Always keep a fire extinguisher around you.

Personal Safety:

You must wear necessary fire protective suits before working with a plasma cutter.

As plasma cutter creates highly intensive light, using them with the naked eye can harm your retina and has a higher chance of being blind. So always wear a helmet with proper eye protection or at least a glass.

But for the best, you can use an automated darkening plasma cutting helmet. Although it will cost you some money, for better protection taking this will be wiser.

Eye Protection Chart

Ampere Rating

Minimum Shade Number

20-40

#4

40-60

#5

60-80

#6

Plasmas are highly heated gas that they create ions. As a result, the plasma torch becomes very much hot quickly. So always use gloves to protect your hands from burning.

As it needs to complete the circuit to work with a plasma cutter and the target plate is a part of the circuit. You must confirm that you are insulated from that. 

Machine Safety:

Always use clean air for cutting. Air having fumes or dust can cause a hazard. Never ever work in a damp weather. You may get an electric shock while doing that. Standing on a rubber platform, while working with a plasma cutter is recommended.

Always work proper ventilated places and while cutting the coated metals, remove the coating first. Finally, never use excessive pressure and use the machine longer than recommended time.

Conclusion

Finally, we are at the bottom of this long review. As you have read this far, now you know all the necessary information and key points that make a plasma cutter for your own purposes.

This is true that each of these machines has some handicap. But if we measure their performance, the handicaps are negligible. Again the main reason, that we have accommodated them in our top ten list is because of their proven performance.

This is obvious that not all of them will be suitable for everybody but for somebody. So, your task is to figure out the most suitable one for you using the guide that I have provided you at the very first of this review.

Hope this guide was helpful.

Thank you for reading with patience.

Joshua J. Salisbury
 

Click Here to Leave a Comment Below 0 comments

Leave a Reply: